|
哪位大侠来说说,上蜡后到底要用几把刷子,狗了一下,网张五花八门,好像不太靠谱
最靠谱好像就是这个总结
1. Coarse Steel brush with wide diameter bristles to change the structure of the base (fibertex after).
Fine Steel hand brush, Brass roto-brush or very fine diameter steel roto-brush to expose the base structure and remove old wax on the surface (fibertex after).
2. Nylon or Copper/Nylon combination brush after scraping to remove the bulk of remaining excess wax.
3.Horsehair brush to remove remaining excess wax that is "clogging" the ski base structure. Horsehair has a finer bristle diamter.
4.Fine Steel hand brush, Brass hand brush, Brass/Horsehair combi hand brush, brass roto-brush or very fine steel roto-brush on colder/harder waxes or when the ski base has a fine structure to expose the base structure. Go very lightly. |
|