同雪网 SkiChinese.com 北美滑雪论坛

标题: 硬塑料怎么粘起来? [打印本页]

作者: quoiguaski 时间: 2012-5-11 00:20
标题: 硬塑料怎么粘起来?

作者: Brady 时间: 2012-5-11 06:39
有些胶可以，尤其是工业用的。但受力浸水等条件不同，用不同的胶，要google粘合剂，搜索胶水不行

作者: b-p 时间: 2012-5-11 07:34
以俺的经验这个基本上就粘不上了

作者: 几亩瓜 时间: 2012-5-11 08:00

b-p 发表于 2012-5-11 07:34
以俺的经验这个基本上就粘不上了

俺也嚼的是, 但是就是想试试看.

昨天已经用502给粘起来了. 但是肯定脆不吃力.

现在正在想加固的法子.

btw: 谁知道那里有买热收缩的塑料管买(1 cm 直径的样子).

作者: luvski 时间: 2012-5-11 08:04
这个东西看着眼熟。

作者: Brady 时间: 2012-5-11 09:16
I do not know your application. I know some adhesives, especially for water sealing. not all by GOOGLE!

if i suggest bostik 7575 (it's for marine, i planed to use on my skies) or loctite 3211 (for water proof, i dont think it's for your application), you may not understand (I assume) or you do not know where to buy. If you are in Toronto, I can give you some of our samples to try.

some of them for high temperature, for sealant etc. some are expoxy based, some are not. some are instant cure, some need oven to cure. it's too complicated. So I suggest google. I know there are some adhesive are very strong, but it's only for industry usage.

You can also take it to homedepot or just buy a new one, it's easier.

作者: quoiguaski 时间: 2012-5-11 09:21

Brady 发表于 2012-5-11 09:16
I do not know your application. I know some adhesives, especially for water sealing. not all by GOO ...

听起来好专业, 你是学这个的?

作者: quoiguaski 时间: 2012-5-11 09:31

Brady 发表于 2012-5-11 09:16
I do not know your application. I know some adhesives, especially for water sealing. not all by GOO ...

回头晚上我把它竖起来, 照一张.

这个玩艺最要命的是粘结面只有 1毫米厚多一点点, 我角的没有胶能在这个小的创面上产生超过原来塑料本身的强度.

所以我想旁边放点加强筋做辅助, 目前我是这么想的:

1, 背面平滑面用牙膏皮,
2, 内侧牙齿部分用一根粗皮筋

然后用某种材料把它裹起来.

您看行不行?

作者: quoiguaski 时间: 2012-5-11 09:42
bostik 7575
http://www.bostik-us.com/files/tdsfiles/Epoxy.pdf

loctite 3211
http://tds.loctite.com/tds5/docs/3211-EN.PDF

看了一会, 头开始发晕了.

作者: Brady 时间: 2012-5-11 09:43
I am using the pc on the floor so I can't type Chinese.

No, I am not an expert. However, we do use some adhesives in our products, most of them are for sealing (to prevent water intrusion or leaking).

all my experience are based on my company's application or some research I did for my company. Just one of the suppliers, henkel, has more than 1000 adhesives. Most of them are for industries. For your particular requirement, it's depend on how badly you want it to be fixed or the cost to fix it. I dont think you REALLY REALLY need it to be fix and want to pay waterever cost to fix it. So, just bring it to homedepot and ask the salesman there, yes or no, that's it. If you go HIGHWAY, then you can ask your company's buyer to ask for some samples from these componies, Henkel, bostik etc.. Usually, it's free. But you need to do some research and "plot" an application for these companies so they will belive you and give you some samples for free.

toothpaste skin is very soft. I do not know the force but usually it will not work.

作者: Brady 时间: 2012-5-11 10:10
For ski equipment? shoes? OMG!

作者: jluo 时间: 2012-5-11 10:27
Use the same concept of steel reinforced concrete, you need to apply a patch on the smooth side, and it will be stronger than before.

作者: Brady 时间: 2012-5-11 10:31
TRY:
http://www.loctiteproducts.com/p ... id-Professional.htm
http://www.loctiteproducts.com/p ... TRA-Gel-Control.htm

they are not for industry, easier to find. Ask the salesman first.

作者: quoiguaski 时间: 2012-5-11 10:35

Brady 发表于 2012-5-11 10:31
TRY:
http://www.loctiteproducts.com/p/sg_bottle_pro/overview/Loctite-Super-Glue-Liquid-Professional ...

Not Recommended For
Glazed surfaces
Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
Use on repairs needing high flexibility

作者: quoiguaski 时间: 2012-5-11 10:37

Brady 发表于 2012-5-11 10:31
TRY:
http://www.loctiteproducts.com/p/sg_bottle_pro/overview/Loctite-Super-Glue-Liquid-Professional ...

这个好

LOCTITE® SUPER GLUE ULTRA GEL CONTROL™

作者: quoiguaski 时间: 2012-5-11 13:43

来自:同雪网 SkiChinese.com 北美滑雪论坛 iPhone客户端

作者: jluo 时间: 2012-5-11 14:02
that is what she said :D

Brady you are "fast"! 发表于 15 分钟前

作者: 闹妈 时间: 2012-5-11 14:27
想起小时候，烧红的铁棒，将两侧的断处烫软，然后迅速粘合，再压紧。。。

作者: 暖暖阳光 时间: 2012-5-11 17:26
下面垫软薄塑料 + 一元店的 SUPER GLUE 试试看。

作者: lupo 时间: 2012-5-11 19:52
头盔上面的啊，买个配件吧。

作者: quoiguaski 时间: 2012-5-12 21:14

lupo 发表于 2012-5-11 19:52
头盔上面的啊，买个配件吧。

新三年, 旧三年, 缝缝补补又三年.

作者: 暖暖阳光 时间: 2012-5-17 21:08
粘好了没，上张图来看看。

作者: lulu 时间: 2012-5-18 08:52
买一套卡扣吧，也许跟原来的不一样，把卡扣和带子重新订上比粘这个卡扣要牢靠的多。MEC有卖各种卡扣的

作者: vicboy™ 时间: 2012-5-18 14:28
又眼花了。以为标题是“硬塑料怎么站起来?“

作者: quoiguaski 时间: 2012-5-18 14:50
谁知道春分的时候，鸡蛋可以站起来？

为什么？

作者: quoiguaski 时间: 2012-5-18 14:53

quoiguaski 发表于 2012-5-18 14:50
谁知道春分的时候，鸡蛋可以站起来？

为什么？

作者: vicboy™ 时间: 2012-5-18 15:19

quoiguaski 发表于 2012-5-18 15:50
谁知道春分的时候，鸡蛋可以站起来？

为什么？

http://zhidao.baidu.com/question/143131668

http://wenwen.soso.com/z/q123742538.htm

http://zjnews.zjol.com.cn/05zjne ... /21/018347675.shtml

http://www.foodeology.com/interesting/raw-eggs-can-stand/

欢迎光临同雪网 SkiChinese.com 北美滑雪论坛 (http://www.skichinese.com/skichinese/)